Avoiding a Segmented Network

Segmented Network

A segmented network is when there are two separate “clouds” of coverage that cannot communicate with each other.  This is usually caused when there is too much distance between devices.

Segmented_Mesh_Pic.jpg

When this occurs, you may experience the following behavior:

  • Units are powered on, but do not show up in the “adding a device” screen during initial installation
  • Not all units responding when turning on/off in the app
  • Moving around the site changes the devices that can be operated
  • Inability to program certain devices

Cloud of Coverage

Mesh devices create a cloud of coverage. If you are anywhere in the cloud, then you will be able to control any other device inside the cloud

Cloud_Coverage.jpg

Range

Devices typically achieve 60-100 feet point to point, indoors and out. Please make sure that all of your devices are within range of each other to form a solid mesh connection, especially if you are only using outdoor products.

 

Correct_Mesh.jpg 

Solutions

In order to solve this issue, the most straight forward options are as follows:

  • Adjust location of units, so that they are closer to another Avi-on device which you are able to control
  • Add additional units to increase the density of the mesh, which will act as repeaters

 

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.
Powered by Zendesk